boat cover support
BOAT COVER SUPPORTS TO PROTECT YOUR BOAT BETTER
We all know that boat covers serve to protect the boat from the harmful effects of the elements. While it can do the job on its own, it would still pay to use boat cover supports to maximize the protection a boat cover provides. Some of the the popular boat cover supports are the following:
ADDITIONAL BOAT COVER TIE-DOWN
A simple, no fuss system that allows you to place the tie down anywhere on the cover for maximum support and maximum protection for the cover. These are sometimes equipped with adjustable strap hooks over movable buttons to give high tension fitting and prevent pooling water. There are also quick release buckles that make cover removal hassle-free. Boat cover tie-downs costs only four dollars.
Bottom of Form
COVER SUPPORT STRAP
The Cover Support Strap are not designed for use with boats wider than ninety inches.
Support strap attaches to boat by attaching s-hooks at the end of each strap to bow eyes on boat. This prevents water from pooling on the cover. These costs fifteen dollars.
BOAT COVER SUPPORT POLE
To protect boat cover and floor.
SELF-ADHESIVE COVER PROTECTOR
A durable material made to protect the cover from wear and punctures from sharp objects.
While boat cover supports bring out maximum performance of your boat cover, care for boat covers should also not be overlooked. The following are general rules to maintain the quality of your boat cover :
· Always use a mild soap such as Ivory Snow, Dreft or Woolite.
· Water should be cold to lukewarm. Never more than 100°F.
· Air dry only. Never apply heat nor subject fabric to spin-drying.
General or Light Cleaning
· Brush off loose dirt.
· Hose down the cloth.
· Prepare a cleaning solution of water and mild soap such as Ivory Snow, Dreft or Woolite. Never use detergents as the materials tend to be too harsh.
· Use a soft bristle brush to clean the fabric. Hard bristled will only weaken the fibers.
· Allow cleaning solution to soak into the fabric.
· Rinse thoroughly.
· Air dry only. Never spin dry.
· May not require retreatment depending on the age of the fabric.
If stubborn stains persist, you can use a diluted chlorine bleach or soap mixture for spot cleaning of mildew, roof run-off or other similar stains. However, this may result in fading of colors and thinning of the fabric if used regularly.
Heavy Cleaning for Stubborn Stains and Mildew
To clean mildew, or other stubborn stains:
· Eight ounces (one cup) of chlorine bleach.
· Two ounces (1/4 cup) of mild soap and/or detergent.
· One gallon of water.
· Clean with soft bristle brush.
· Allow mixture to soak into the fabric for up to 20 minutes.
· Rinse thoroughly.
· Air dry.
· Repeat if necessary.
· Retreatment of fabric for water and stain resistance will be necessary.
If a boat cover is suitable in size for a washing machine, these steps should be followed:
· Use mild soap and/or detergent.
· For heavier stains add 1 cup of bleach to wash.
· Wash and rinse in cold water.
· Air dry. Never apply heat to Sunbrella.
· Retreatment for water and stain resistance will be necessary after machine washing.
Source: http://www.bloggedadvice.com